| View previous topic :: View next topic |
| Author |
Message |
DougRed4
Rear Admiral
Joined: 18 Jan 2013
Posts: 2259
Location: Seattle, WA
|
 Posted: Thu Nov 30, 2023 2:11 pm Post subject: Body Strength of a Lightsaber |
 |
|
In our last game, my players had an epic battle with a Dark Jedi aboard their starship. On a roll of a 1, I had the lightsaber go flying out of his hand, and it slid to a stop in an adjacent cargo hold. One PC decided to blast the lightsaber.
What sort of body strength do you think a lightsaber should have? The typical 2D of most hand weapons?
_________________
Currently Running: Villains & Vigilantes (a 32-year-old campaign with multiple groups) and D6 Star Wars; mostly on hiatus are Adventures in Middle-earth and Delta Green |
|
| Back to top |
|
 |
garhkal
Sovereign Protector
Joined: 17 Jul 2005
Posts: 14034
Location: Reynoldsburg, Columbus, Ohio.
|
| Posted: Thu Nov 30, 2023 4:14 pm Post subject: |
|
|
Since it's supposed to be hand made by the jedi wielding it, i'd give it 3d, IF Attuned.. 2d otherwise.
_________________
Confucious sayeth, don't wash cat while drunk! |
|
| Back to top |
|
|
Mamatried
Commodore
Joined: 16 Dec 2017
Posts: 1829
Location: Norway
|
| Posted: Fri Dec 01, 2023 12:30 pm Post subject: |
|
|
I would also go with a 3D for the Attuned and made by wielder lightsaber body strength.
i would also add pips accordingly with some of the lightsabers that are constructed with special and durable materials.
I would palaptine's electrum (coated?) lightsabers a +1 to body strength as an example
then I would go with size as well with a double and large slightsaber possibly be 4D and 3D respectively and shoto and the smaller lghtsabers 2D and 1D respectively |
|
| Back to top |
|
|
CRMcNeill
Director of Engineering
Joined: 05 Apr 2010
Posts: 16178
Location: Redding System, California Sector, on the I-5 Hyperspace Route.
|
| Posted: Fri Dec 01, 2023 2:53 pm Post subject: Re: Body Strength of a Lightsaber |
|
|
| DougRed4 wrote: | In our last game, my players had an epic battle with a Dark Jedi aboard their starship. On a roll of a 1, I had the lightsaber go flying out of his hand, and it slid to a stop in an adjacent cargo hold. One PC decided to blast the lightsaber.
What sort of body strength do you think a lightsaber should have? The typical 2D of most hand weapons? |
Unless it’s specifically hardened against damage, I’d stick to the 2D from the RAW. However, its small size provides an additional layer of protection, in that it’s a lot harder to hit. Under the RAW, you’d use the Called Shot rules; if you’re looking for a house rule alternative, a lightsaber would be Tiny-Scale (-4D) in my Scale System.
_________________
"No set of rules can cover every situation. It's expected that you will make up new rules to suit the needs of your game." - The Star Wars Roleplaying Game, 2R&E, pg. 69, WEG, 1996.
The CRMcNeill Stat/Rule Index
|
|
| Back to top |
|
|
garhkal
Sovereign Protector
Joined: 17 Jul 2005
Posts: 14034
Location: Reynoldsburg, Columbus, Ohio.
|
| Posted: Fri Dec 01, 2023 4:32 pm Post subject: |
|
|
IIRC tiny is for things 10cm or under. Most light sabers seem to be around 7 to 10 inches in length.
_________________
Confucious sayeth, don't wash cat while drunk! |
|
| Back to top |
|
|
CRMcNeill
Director of Engineering
Joined: 05 Apr 2010
Posts: 16178
Location: Redding System, California Sector, on the I-5 Hyperspace Route.
|
| Posted: Fri Dec 01, 2023 4:58 pm Post subject: |
|
|
| garhkal wrote: | | IIRC tiny is for things 10cm or under. Most light sabers seem to be around 7 to 10 inches in length. |
Under my system, Tiny covers large hand-held objects, such as blaster pistols, data pads, and some tools. Smaller objects like comlinks, a deck of cards, data chips or hold-out blasters would be Minute-Scale (-6D).
_________________
"No set of rules can cover every situation. It's expected that you will make up new rules to suit the needs of your game." - The Star Wars Roleplaying Game, 2R&E, pg. 69, WEG, 1996.
The CRMcNeill Stat/Rule Index
|
|
| Back to top |
|
|
Whill
Dark Lord of the Jedi (Owner/Admin)
Joined: 14 Apr 2008
Posts: 10297
Location: Columbus, Ohio, USA, Earth, The Solar System, The Milky Way Galaxy
|
|
| Back to top |
|
|
KageRyu
Commodore
Joined: 06 Jul 2005
Posts: 1391
Location: Lost in the cracks
|
| Posted: Sat Dec 02, 2023 2:41 am Post subject: |
|
|
| Whill wrote: | | garhkal wrote: | | IIRC tiny is for things 10cm or under. Most light sabers seem to be around 7 to 10 inches in length. |
For some reason, the mixed measurement systems in this post nerd-rages me.
 |
If only we could keep measurements in the forum to the tried and true "Bigger than a Bread Box" standards.
_________________
"There's a set way to gain new Force Points and it represents a very nice system, where you're rewarded for heroism, not for being a poor conductor to electricity." ~Jachra |
|
| Back to top |
|
|
Inquisitor1138
Captain
Joined: 28 Nov 2021
Posts: 604
Location: Hoth. Or Ilum...
|
| Posted: Tue Dec 19, 2023 9:58 am Post subject: here we go again! |
|
|
| KageRyu wrote: | | Whill wrote: | | garhkal wrote: | | IIRC tiny is for things 10cm or under. Most light sabers seem to be around 7 to 10 inches in length. |
For some reason, the mixed measurement systems in this post nerd-rages me.
|
If only we could keep measurements in the forum to the tried and true "Bigger than a Bread Box" standards.
|
...
Oh, no...
Found another rabbit hole, i have...
_________________
Facing all that you fear will free you from yourself.
 
The Rancor Pit Library
Bounty Hunting is a Complicated Profession... Wouldn't you agree?
Game Mastering is a Complicated Profession... Wouldn't you agree?
Count Dooku: Your swords, please. We don't want to make a mess of things in front of the Chancellor. |
|
| Back to top |
|
|
garhkal
Sovereign Protector
Joined: 17 Jul 2005
Posts: 14034
Location: Reynoldsburg, Columbus, Ohio.
|
| Posted: Tue Dec 19, 2023 3:53 pm Post subject: |
|
|
I thought it was a Gopher hole, not a rabbit one..
_________________
Confucious sayeth, don't wash cat while drunk! |
|
| Back to top |
|
|
DougRed4
Rear Admiral
Joined: 18 Jan 2013
Posts: 2259
Location: Seattle, WA
|
| Posted: Tue Dec 19, 2023 5:26 pm Post subject: |
|
|
Gone down a Porg hole, the padawan has...
_________________
Currently Running: Villains & Vigilantes (a 32-year-old campaign with multiple groups) and D6 Star Wars; mostly on hiatus are Adventures in Middle-earth and Delta Green |
|
| Back to top |
|
|
Inquisitor1138
Captain
Joined: 28 Nov 2021
Posts: 604
Location: Hoth. Or Ilum...
|
| Posted: Tue Dec 26, 2023 5:18 pm Post subject: Re: Body Strength of a Lightsaber + Engineering! |
|
|
| garhkal wrote: | | Since it's supposed to be hand made by the jedi wielding it, i'd give it 3d, IF Attuned.. 2d otherwise. |
I don't think Attunement would affect that...
| Mamatried wrote: | I would also go with a 3D for the Attuned and made by wielder lightsaber body strength.
i would also add pips accordingly with some of the lightsabers that are constructed with special and durable materials.
I would palaptine's electrum (coated?) lightsabers a +1 to body strength as an example
then I would go with size as well with a double and large slightsaber possibly be 4D and 3D respectively and shoto and the smaller lghtsabers 2D and 1D respectively |
Um, no. Electrum is an alloy of two of the softest, least durable metals, Gold & Silver, which as i recall are Hardness 3 on the Mohs scale.
Electrum is decorative, mainly used in jewelry/bling, & art objects.
Durasteel might be up to 3 or 4D, but if using Phrik or Beskar, 5D to 6D max.
Tungsten Carbide or Diamond for hardest real-world materials, or Bronzium for SW in-universe materials; look up any armor in SW to see what it's made of. There's no shortage of durable materials to choose from.
Lightsabers of any type are high-quality construction, so should have Body Str 2D minimum. Ancient/Archaic Lightsabers, proto-sabers & Light Foils might be more fragile at a mere 1D.
| CRMcNeill wrote: | | DougRed4 wrote: | In our last game, my players had an epic battle with a Dark Jedi aboard their starship. On a roll of a 1, I had the lightsaber go flying out of his hand, and it slid to a stop in an adjacent cargo hold. One PC decided to blast the lightsaber.
What sort of body strength do you think a lightsaber should have? The typical 2D of most hand weapons? |
Unless it’s specifically hardened against damage, I’d stick to the 2D from the RAW. However, its small size provides an additional layer of protection, in that it’s a lot harder to hit. Under the RAW, you’d use the Called Shot rules; if you’re looking for a house rule alternative, a lightsaber would be Tiny-Scale (-4D) in my Scale System. |
THIS.
| Whill wrote: | | garhkal wrote: | | IIRC tiny is for things 10cm or under. Most light sabers seem to be around 7 to 10 inches in length. |
For some reason, the mixed measurement systems in this post nerd-rages me.
|
10 cm = 3 15/16in
7 in = 17.8 cm
10 in = 25.4 cm
12 in = ≈30.5 cm
20 in = 50.8 cm
24 in = ≈61.0 cm
i need to make some Lepi characters. It's Long Overdue.
Metallurgists, Scouts, Smugglers & Scoundrels, most definitely! Jedi, Dark Jedi, Inquisitors, & Bounty Hunters, Oh My!
General Xie's Corulag Fried Porg™ is a thing in my SWU!
Try the Gizka Nuggets™!
| DougRed4 wrote: | | Gone down a Porg hole, the padawan has... |
"That's no partridge in the Blba tree, it's a Sith Porg!"
_________________
Facing all that you fear will free you from yourself.
The Rancor Pit Library
Bounty Hunting is a Complicated Profession... Wouldn't you agree?
Game Mastering is a Complicated Profession... Wouldn't you agree?
Count Dooku: Your swords, please. We don't want to make a mess of things in front of the Chancellor. |
|
| Back to top |
|
|
|
